Maximum power and performance from an air-cooled CO2 laser is the drive behind our ti Series technology. The Synrad ti Series lasers use a patented hybrid-unstable resonator design to deliver excellent beam quality focused to the smallest achievable spot size, delivering the maximum power density on a work surface. The high performance RF circuitry designed specifically to match its compact resonator delivers fast rise times with outstanding performance. High power, fast pulsing capabilities, and exceptional optical quality are ideally suited for applications where rapid scanning or pulsing of the laser beam is required. The result is faster processing speeds, higher resolution and optimized quality for cutting, marking and engraving applications from a compact CO2 laser.
Wide range of average power and wavelength options:
ti60/ti80/ti100
Compact CO2 lasers with more than 60/80/or 100 Watts of average power for high-speed marking, cutting, and 3D printing applications are available with multiple wavelength options to process a broad range of materials. A unique 100 Watt fan-cooled model is available for OEMs and system integrators seeking an economical and efficient 100 Watt CO2 laser source.
High Stability ti Series CO2 Lasers
Compact CO2 lasers with over 60, 80, and 100 Watts of average power and ±2% power stability (after 3 minute warm-up) for high precision cutting, marking, and 3D printing applications
ti100 Pulsed CO2 Laser
Compact, pulsed CO2 laser with more than 300 Watts of peak power for precise cutting, drilling, perforating, and marking applications on heat-sensitive materials.
Zero power loss across 9.3 μm, 10.2 μm, and 10.6 μm wavelength models. Patented taper technology enables a hybrid unstable and waveguide resonator to maximize optical efficiency and power output at all CO2 wavelengths.
Maximum machine and system design flexibility with consistent beam exit height across all lasers in the Synrad ti and vi Series. Same size compact footprint across all ti Series models with multiple cooling options enable effective and economical choices when designing new machines or integrating into in-line systems.
High stability 60, 80, and 100 Watt models available for applications that demand both precision and higher throughput speeds
> 60 Watts
> 80 Watts
> 100 Watts
> 60 Watts > 80 Watts > 100 Watts
> 100 Watts (avg.) > 300 Watts (pulse)2
9.3 μm 10.2 μm 10.6 μm
10.6 µm
< 1.2
± 7%
± 4% (± 2% guaranteed after 3 mins)
2.0 mm ± 0.3 mm
6.5 mm ± 2.0 mm3
0 – 160 kHz
0 – 100 kHz
0 – 100%
< 50%
Air, Fan, Water
Fan, Water
Water
571 x 158 x 148 (22.5 x 6.2 x 5.8)
n/a
571 x 196 x 150 (22.5 x 7.7 x 5.9)
584 x 143 x 150 (23 x 5.6 x 5.9)
544 x 104 x 150 (21.4 x 4.1 x 5.9)
633 x 142 x 150 (24.9 x 5.6 x 5.9)
11.6 kg (25.5 lbs.)
13.1 kg (28.9 lbs.)
14.6 kg (32.1 lbs.)
11.9 kg (26.2 lbs.)
19 kg (42 lbs.)
12.1 kg (26.7 lbs.)
1 – Power level guaranteed for 2 years from date of shipment, regardless of operating hours, within recommended coolant flow rate and temperature range. 2 – Peak pulse power measured at 1 kHz, 10% duty cycle 3 – With 3X beam expander
4 – Measured from cold start as ±(Pmax-Pmaxmin)/(Pmaxmax+Pmaxmin)
5 – Measured after 3 minutes
