The dispersive mirrors I have clip the edges of the spectrum from my oscillator, does this matter? To obtain the pulse duration measured during manufacture, the complete spectrum is needed. Also the outer Keep Reading
Articles & Whitepapers Analog vs. Digital Galvanometer Technology – An Introduction ...industry and in-country application and service support, Novanta delivers reliable, precise, and durable components and sub-systems. Keep Reading
gem – Solid State Continuous Wave Lasers High power levels, excellent beam quality, low noise, and high stability in a compact package Keep Reading
Articles & Whitepapers Challenges of CO2 Laser and Scan Head Subsystem Integration ...a broad range of commercially available wavelengths (UV – IR), power levels (mW – kW), pulse Keep Reading
finesse- Solid State Continuous Wave Lasers 532 nm laser used worldwide as the ideal Ti:Sapphire pump lasers with high power to size Keep Reading
How do I change the polarization of my laser beam? There are different approaches to use; one would be to use a wave plate. However, the Keep Reading
Articles & Whitepapers Calibration Accuracy for Laser & Scan Head Sub-Systems ...the CalWizard Manual. Equipment used: Laser – 20W IPG (Part # YLP-V2-1-100-20-20) F-Theta – F-160 Jenoptik Keep Reading
Announcements & Updates New! Versia 2-Axis Scan Head Novanta Launches New 2-Axis Scan Head, VERSIA The Versia 2-axis Scan Head, ideal for mid-market micromachining Keep Reading
Can you explain the sensitivity on the long term performance of the venteon CEP5 to beam pointing stability? Is the maximum beat signal stable? ...of stability, the CEP stabilized laser system (the pump laser and femtosecond oscillator) and f-to-2f interferometer Keep Reading
PRECESSION ELEPHANT 2 ...2 is available for ultraviolet, green and two infrared wavelength ranges, each with two different focal Keep Reading
axiom – Solid State Continuous Wave Lasers Ultra-compact architecture incorporates active optics and integrated water cooling without the integration complexities associated with fiber Keep Reading
FIBER TIGER Engineered by our ARGES brand, the FIBER TIGER is an extremely compact and robust scan head Keep Reading
Announcements & Updates Synrad DC-1 30V Power Supply Obsolete Notification Date: 2 May 2024 Prepared for: Synrad DC-1 Power Supply Customers Description: PCN 005-2024: DC-1 Keep Reading
Is the venteon f-to-2f interferometer in CEP5 complex and difficult to handle? Not at all! The venteon f-to-2f interferometer is very compact, almost common path configuration and hands-off, Keep Reading
p-Series, 100-400 Watt Pulsed CO2 Lasers ...for sensitive high-speed cutting applications. Surface deformation commonly associated with mechanical cutting systems is eliminated. Keep Reading
Announcements & Updates Synrad 48-1 Chassis Hole Removal Notification Date: 16 April 2024 Prepared for: Synrad 48-1 CO2 Laser Customers Description: PCN 004-2024: 48-1 Keep Reading
Why don’t you use the DFG approach for CEP stabilization like other companies where there is no need of a nonlinear fibre, nor interferometer? This approach still requires a nonlinear broadening, which can cause amplitude-to-phase noise conversion affecting the stabilization Keep Reading
ti Series – 60-100 Watt CO2 Lasers Wide range of average power and wavelength options: ti60/ti80/ti100 Compact CO2 lasers with more than Keep Reading
Announcements & Updates v30, CO2 Laser Power Cable and Fuse Assembly Change Notification Date: 1 February, 2024 Prepared For: Synrad v30, CO2 Laser Customers Product Change Notification: PCN Keep Reading
Why don’t you use a complete common path f-to-2f interferometer for stabilization? The venteon CEP5 f-to-2f interferometer setup is almost common path. A common path interferometer is typically Keep Reading
