Is it possible to adjust the repetition rate of the laser? ...repetition rate. In a taccor system for example, a temperature change of 1°C leads to a Keep Reading
taccor – Ultrafast Femtosecond Lasers ...power for the configuration, up to 1.8 W. taccor Tune A tuneable wavelength for applications Keep Reading
Blog Essential Elements for Laser Additive Manufacturing ...equipment manufacturers). Additionally, Novanta holds deep proprietary expertise in photonics, vision and precision motion technologies. We Keep Reading
Improving Tracking, Tracing, and Quality Assurance of Customized Pediatric Orthotics ...personalize their device. For younger patients especially, this is a particularly important feature. As Loretta Sheldon, Keep Reading
gecco – Ultrafast Femtosecond Laser Set-and-forget femtosecond laser delivers reliable and reproduceable results gecco One Easy integration of this set-and-forget Keep Reading
The venteon oscillator emits an extremely large spectral bandwidth, do I need to pay attention when choosing steering mirrors for beam delivery? ...as they may introduce phase jumps in the spectral regions where the stacks join, which will Keep Reading
Announcements & Updates UK Conformity Assesed (UKCA) Marking ...in Great Britain (England, Wales, and Scotland) beginning January 1, 2023. Therefore, Novanta is incorporating this Keep Reading
venteon – Ultrafast Femtosecond Lasers Shortest pulses and widest spectral bandwidth for physical, biological, and chemical research applications venteon Power Keep Reading
My measured spectrum of the oscillator looks very different from the one shown on the certificate of conformity. Why has this happened? ...the long wavelength edge above 1000nm, which will be largely underestimated by non-calibrated spectrometers. High accuracy Keep Reading
What about the dispersion pre-compensation, what do I need it for? ...example, the dispersion of the beam splitter of a typical autocorrelator has to be compensated for Keep Reading
Articles & WhitepapersProduct Information Choosing the Correct Beam Delivery Method for Your CO2 Laser Cutting Application ...for medical and advanced industrial OEMs. Learn more about Novanta by contacting us here. Keep Reading
Announcements & UpdatesProduct Information EOL Update- Cambridge Technology Products – Feb. 2022 ...equipment manufacturers). Additionally, Novanta holds deep proprietary expertise in photonics, vision and precision motion technologies. We Keep Reading
Can I not simply neglect the effect of the dispersive pulse broadening? ...off a pair of DCM11 mirrors, are needed (one pair of DCM11 mirrors introduces approx. -130fs² Keep Reading
ventus – Solid State Continuous Wave Lasers ... ventus 660 Stability, beam quality and long lifetimes with ultralow noise ventus 671 High Keep Reading
How do I do dispersion pre-compensation? ...shortest pulse duration at the target. Alternatively, these can be combined together in a “pre-chirper” with Keep Reading
Articles & Whitepapers Galvanometer Scanning Technology and 9.3Β΅m CO2 Lasers for On-The-Fly Converting Applications ...high-speed galvanometer scan heads. The materials involved are often thin plastic films, paper, cardboard, fabric and Keep Reading
opus – Solid State Continuous Wave Lasers Up to 10 Watts of highly stable infra-red light with a TEM00 beam for multi-channel optical Keep Reading
Why is there not a pulse compression directly out of the laser? ...users experiment is what matters and the compensation should be done only once, as this gives Keep Reading
Articles & Whitepapers Using Wobble Based Laser Scanning Techniques in Additive Manufacturing Applications ...affects the end part quality, and can contaminate the layer. Melt Pool Lawrence Livermore Keep Reading
